Step Down Toroidal Transformer for Lighting

Sep 18, 2025

Leave a message

Step Down Toroidal Transformer for Lighting Product Description


 

Transformer is a static electromagnetic device that converts electrical energy to magnetic energy and then back to electrical energy which is transferred between two or more circuits.

 

Transformer plays an important role in the circuit, such as isolation, voltage conversion, impedance matching, noise wave filtering, and surge protection. It is widely used in household applications, lighting power supply, audio power supply, power adapter, industrial control power supply, DC inverter, UPS, EPS/compensation voltage regulator, new energy equipment, and others.

 

According to their core structure, single-phase transformers with small and medium power can be divided into toroidal type (O type), EI type, R type, CD type, double column dry type, etc. Yet, the toroidal transformer is the most widely used because of its plentiful advantages.

Step Down Toroidal Transformer for Lighting
Step Down Toroidal Transformer for Lighting
Step Down Toroidal Transformer for Lighting
 

Advantages of Step Down Toroidal Transformer for Lighting

1. High efficiency and cost effective

The toroidal core has good electromagnetic performance of high saturation magnetic flux density, high primary inductance, and large unit magnetizing power capacity. It helps improve the utilization rate and the winding window area, reduce the number of turns and the direct current resistance, and also greatly improve the overload capacity and load efficiency of the toroidal transformer.

 

With NICORE toroidal core, you do not need to consider the power margin and heat dissipation of your product, and you can also effectively control the cost.

 

2. Excellent no-load characteristics

The toroidal core is wound with high permeability silicon steels to form a closed magnetic circuit with low magnetic resistance. Under the condition of constant power and magnetic field density, the no-load loss and exciting current of toroidal transformer are only 50%~70% of other transformers. The toroidal core helps reduce the standby loss and improve the equipment operation reliability.

 

3. Low noise

The toroidal core is closed and tightly winded with silicon steels. It is formed after vacuum pressure impregnation treatment. Even at middle and high magnetic frequency, it will not cause noise due to magnetic expansion, which is what the EI, dry-type, and other lamination cores cannot achieve.

 

4. Low magnetic flux leakage, low leakage inductance

The toroidal core has a high saturation flux density and coils are uniformly distributed on the core. The magnetic potential difference can effectively reduce the magnetic leakage.

 

Normally, under the condition of the same specification, the magnetic flux leakage of toroidal transformer is only 1/10 of the EI's. The main coil is tightly and rationally layered and winded, the primary and secondary coils thus can be better coupled to reduce the primary and secondary leakage inductance.

 

5. Safe electrical structure

There are stacked dielectric films with a certain thickness between the core and primary coils, primary coil and electrostatic shielding, electrostatic shielding and secondary coils, secondary coil and the installation plate, which isolate the electrical gap completely and improve safety. Therefore, the isolated toroidal cores have been widely used in medical equipment transformers.

 

6. Full-band response

Toroidal core is wound with high-flux and high-sensitivity silicon steels.

 

-The thinner steel, continuous flux path, and low magnetic resistance reduce the area of hysteresis loop and the eddy current loss. It also guarantees high alternating magnetic field conversion cycle and efficiency (residual magnetism will always exist, and the smaller the hysteresis curve area is, the better the alternative magnetic field switching can be).

 

In the medium and high frequency magnetic field, the loss is low; the signal extension and the bonding are more continuous and fluent.

 

-The high permeability and high sensitivity ensure the overload output to be 8 to 10 times of transient power (magnetizing capacity of the core is large enough and is not easily saturated) at low frequency, and therefore toroidal transformer are widely used in power amplifier and audio power supply.

 

7. Compact size, light weight, and easy installation

The design of toroidal transformer is very flexible.

 

-For constant cross-sectional area, the OD and height can be customized to meet the installation requirement.

-For constant load performance, the coils and iron core can be adjusted to meet the requirements of size and weight.
-In general, high power toroidal transformers are 50% lighter in weight than laminated transformers and can operate more reliably.

 

Step Down Toroidal Transformer for Lighting parameter

Power(VA) Adjusting Rate(%) Efficiency(%) Exterior Dimension(mm) Weight(kg)

Installing Aperture

(mm)

Screw(mm)
Height(A) Exterior(B)
15 20 73 25 65 0.38 Φ6.5 M6
30 16.5 76.6 30 78 0.6 Φ6.5 M6
50 15.2 82.4 35 82 0.85 Φ6.5 M6
80 12.6 84.7 38 88 1.1 Φ6.5 M6
100 11.2 86.5 45 93 1.5 Φ8.5 M8
120 9.6 88 42 115 1.6 Φ8.5 M8
150 7.2 88.1 47 103 1.9 Φ8.5 M8
160 6.6 88.6 42 118 2.1 Φ8.5 M8
200 6.1 89.7 48 120 2.4 Φ8.5 M8
250 5.5 90.3 50 127 2.9 Φ8.5 M8
300 5.2 91.7 55 127 3.2 Φ8.5 M8
400 4.6 93 56 146 4.5 Φ8.5 M8
500 4.0 94 57 147 5.0 Φ8.5 M8
600 4.1 95 72 155 6.7 Φ8.5 M8
700 3.8 95 82 162 8.9 Φ8.5 M8
800 3.8 95.1 72 170 8.2 Φ8.5 M8
1000 3.3 95 83 163 9.5 Φ10.5 M10
1200 2.9 96.2 85 165 11.00 Φ10.5 M10
1500 2.9 96 90 170 13.00 Φ10.5 M10
2000 2.8 96 105 180 15.6 Φ10.5 M10
3000 2.5 97 110 210 22.3 Φ10.5 M10
3500 2.4 97 115 245 25.2 Φ13.5 M13
4000 2.3 97 130 260 31.5 Φ13.5 M13

 

GNEE Featured Products

 

Gnee provides premium iron cores to the world. Our cores can be selected in a wide range of materials, shapes, applications, manufacturing techniques, etc., to meet customers' diverse demands. Explore our wide product range now~

Manufacturing Process

 

Raw Material Sourcing

1. Raw Material Sourcing

Slitting

2. Slitting

Punching

3. Punching

Laminating

4. Laminating

Core Forming

5. Core Forming

testing

6. testing

GNEE New Material

Founded in 2008 and located in Anyang in China, GNEE New Material is a high-tech enterprise specializing in researching and manufacturing iron core products.
The company currently occupies over 20,000 square meters and employs more than 200 people, including over 80 professionals. After more than 18 years of development, we have built our own magnetic material production base and independently develope, produce, and sell various kinds of iron cores. The common types include silicon steel cores, motor cores, transformer cores, toroidal iron cores, special-shaped cores, custom cores, and others. Our cores are widely applied in different sectors including transformers, motors, mutual inductors, voltage stabilizers, welding machines, magnetic amplifiers, and instrumentation, providing diverse core solutions to global customers.

GNEE New Material

30+

Types of Products

18k+

Happy Clients

 

 

 

Why Choose GNEE New Material?

 

GNEE New Material was founded in 2008, which is a National High-tech Enterprise & Famous Brand Enterprise in China, developing into a professional manufacturer and supplier of high-quality iron cores.

 

18+

Over 18 years of success in the iron core industry;
National High-tech Enterprise & Famous Brand Enterprises in China;

 
 

200+

Over 200 employees;
The R&D team has more than 80 experienced engineers and the production team has more than 100 skilled staffs;

 
 

35+

Annual turnover up to 35 million dollor per year;
Owns many sets of highly automatic winding, annealing, and assembling machines;

 
 

1,000+

Over 1000 customers in domestic and overseas markets;
core Products are exported to more than 70 countries in the world;

 

GNEE New Material Factory Overview

GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory

Meet Our Sales Manager

 

"The Core of the Iron Core, the Power of Leadership" - See Our Great Decision-Makers Deeply Engaged in the Magnetic Materials Industry.

CEO

Edison Zhang

CEO

General Manager

Kelly Zhang

General Manager

Sales Manager

Alex Cao

Sales Manager

 

 

Industries Served

 
Automobile Industry

Automobile Industry

New Energy

New Energy

Motor Applications
Motor Applications
Transformer Applications

Transformer Applications

modular-1

Our Mission

Strive To Create world-class Iron core brand

With 18 Years of industry experience, we focus on the research, development, and manufacturing of high-quality iron cores for electricity, industrial control, new energy, and automotive markets

Send Inquiry