Five Key Performances Of Motor Stator And Rotor Cores
Oct 20, 2025
Leave a message
Motor Stator And Rotor Core
A motor mainly consists of two parts: the stationary stator and the rotating rotor, which are detailed as follows:
1. Stator (Stationary Part)
Stator Core: A key part of the motor's magnetic circuit, on which the stator windings are mounted.
Stator Windings: Coils that form the circuit part of the motor. They connect to the power supply and are used to generate a rotating magnetic field.
Frame: Fixes the stator core and motor end caps, and serves functions such as protection and heat dissipation.
2. Rotor (Rotating Part)
Rotor Core: An important part of the motor's magnetic circuit, in the slots of which the rotor windings are placed.
Rotor Windings: Cut the rotating magnetic field of the stator to generate induced electromotive force and current, and form electromagnetic torque to make the motor rotate.

Performance Characteristics of Stator and Rotor Cores
- The stator and rotor cores have high saturation magnetic induction, which is conducive to selecting a high operating magnetic induction point.
- Stator and rotor cores with low coercivity and high initial permeability can reduce the operating current of residual current devices (RCDs).
- The high magnetic permeability of the stator and rotor cores greatly improves the accuracy of transformers and reduces the ratio error.
- The stator and rotor cores, featuring light weight and low cost, are significantly superior to permalloy.
- The stator and rotor cores have good overload resistance and temperature stability. They can work continuously at 55–130°C.
Stator and Rotor Core Application
I. Industrial and Automation Field
- General Mechanical Equipment: For induction motors that drive fans, water pumps, compressors, and conveyors, their stator and rotor cores mostly use low-to-medium grade non-oriented electrical steel to meet the demand for high stability in continuous operation.
- Machine Tools and Precision Equipment: Stator and rotor cores for spindle motors and servo motors of CNC machine tools require high-precision lamination and low-loss electrical steel to ensure accurate speed control and low energy consumption.
- Industrial Robots: Cores for joint drive motors of industrial robots are small in size and high in precision. Some use thin-gauge electrical steel sheets (e.g., 0.3mm thick) to adapt to the needs of high-frequency start-stop and lightweight design.
II. Home Appliance and Consumer Electronics Field
- White Goods: Cores for drum motors of washing machines, compressor motors of air conditioners, and cooling fan motors of refrigerators are mostly designed to be miniaturized, with a focus on low cost and low noise to suit long-term household use.
- Consumer Electronics: Cores for vibration motors of mobile phones and cooling fan motors of laptops are extremely small (some with a diameter of only a few millimeters), requiring ultra-high-precision stamping to meet the lightweight needs of portable devices.
III. New Energy and Transportation Field
- New Energy Vehicles: Cores for drive motors, power steering motors, and window lift motors adopt high-grade non-oriented electrical steel (e.g., 50W250). They need to be high-temperature resistant (above 130℃) and vibration resistant to adapt to high-load working conditions in vehicles. Transformers inside charging piles also rely on the low-loss characteristics of stator and rotor cores to improve charging efficiency.
- Rail Transit: Cores for traction motors of subways and high-speed trains are large in size and high in power. They use high-strength electrical steel sheets and multi-layer lamination structures to ensure stable magnetic performance during high-speed operation.
IV. Infrastructure and Special Fields
- 5G Communications: Cores for cooling motors of signal transmission equipment and backup power motors in 5G base stations need to adapt to outdoor high and low temperature environments (-40℃ to 60℃) and have weather resistance and long service life.
- Medical Equipment: Cores for drive motors of magnetic resonance imaging (MRI) equipment and ventilator motors require low magnetic interference and low noise. Some use non-magnetic steel auxiliary structures to avoid affecting the accuracy of medical testing.
specification
Raw Material: Our premium CRGO silicon steel is sourced exclusively from renowned manufacturers, Baosteel and WISCO, ensuring top-tier quality for your transformer core laminations.
GRADE we supply:B30P120, B30P105, B30R100, 27QG120, 27QG100, 23Q110, 23QG100, 23QG095, 23RK090, 23RK085, 23QG085, 23RK085, 23QG085, 23RK080, 23RK075, B23R070, 20QG085, 20RK080, 20RK075, B20R070, B20R065,M0H,M1H,M2,M3,M4,M5.
23HP75d, 23HP80d, 23HP85d, 23HP90d, 23HP95d, 23HP100, 23HP100d, 27HP100, 27HP110, 27CG110, 27CG120, 30CG120, 30CG130
| Type | Grade | Width | Max Core Loss@P1.7T/50Hz | Lamination Factor(%) | Min Induction@B800 |
| Common Type | 23Q110 | 35-1200mm | 1.10w/kg | 97.2 | 1.82T |
| 23Q120 | 1.20w/kg | 97.2 | 1.82T | ||
| 27Q120 | 1.20w/kg | 97.5 | 1.82T | ||
| 30G120 | 1.20w/kg | 98 | 1.82T | ||
| High Induction Type |
B20P085 | 35-1200mm | 0.85w/kg | 97 | 1.86T |
| B23P085 | 0.85w/kg | 97.2 | 1.88T | ||
| B23P090 | 0.90w/kg | 97.2 | 1.88T | ||
| B23P095 | 0.95w/kg | 97.2 | 1.88T | ||
| B23P100 | 1.00w/kg | 97.2 | 1.88T | ||
| B27P095 | 0.95w/kg | 97.5 | 1.89T | ||
| 27QG100 | 1.00w/kg | 97.5 | 1.89T | ||
| B30P105 | 1.05w/kg | 98 | 1.89T | ||
| Domain Refined High Induction Type(Laser) |
B20R070 | 35-1200mm | 0.70w/kg | 97 | 1.86T |
| B23R085 | 0.85w/kg | 97.2 | 1.88T | ||
| B27RK085 | 0.85w/kg | 97.5 | 1.89T |
We meticulously calculate and regularly update quotations based on your comprehensive drawings, ensuring precision and cost-effectiveness in every transaction.
Upon receiving your confirmation, we seamlessly transition into production, adhering stringently to the meticulously detailed drawings you provide to ensure flawless execution.
GNEE Featured Products
Gnee provides premium iron cores to the world. Our cores can be selected in a wide range of materials, shapes, applications, manufacturing techniques, etc., to meet customers' diverse demands. Explore our wide product range now~
Manufacturing Process

1. Raw Material Sourcing

2. Slitting

3. Punching

4. Laminating

5. Core Forming

6. testing
GNEE New Material
Founded in 2008 and located in Anyang in China, GNEE New Material is a high-tech enterprise specializing in researching and manufacturing iron core products.
The company currently occupies over 20,000 square meters and employs more than 200 people, including over 80 professionals. After more than 18 years of development, we have built our own magnetic material production base and independently develope, produce, and sell various kinds of iron cores. The common types include silicon steel cores, motor cores, transformer cores, toroidal iron cores, special-shaped cores, custom cores, and others. Our cores are widely applied in different sectors including transformers, motors, mutual inductors, voltage stabilizers, welding machines, magnetic amplifiers, and instrumentation, providing diverse core solutions to global customers.

30+
Types of Products
18k+
Happy Clients
Why Choose GNEE New Material?
GNEE New Material was founded in 2008, which is a National High-tech Enterprise & Famous Brand Enterprise in China, developing into a professional manufacturer and supplier of high-quality iron cores.
18+
Over 18 years of success in the iron core industry;
National High-tech Enterprise & Famous Brand Enterprises in China;
200+
Over 200 employees;
The R&D team has more than 80 experienced engineers and the production team has more than 100 skilled staffs;
35+
Annual turnover up to 35 million dollor per year;
Owns many sets of highly automatic winding, annealing, and assembling machines;
1,000+
Over 1000 customers in domestic and overseas markets;
core Products are exported to more than 70 countries in the world;
GNEE New Material Factory Overview






Meet Our Sales Manager
"The Core of the Iron Core, the Power of Leadership" - See Our Great Decision-Makers Deeply Engaged in the Magnetic Materials Industry.

Edison Zhang
CEO

Kelly Zhang
General Manager

Alex Cao
Sales Manager
Industries Served

Automobile Industry

New Energy


Transformer Applications

Our Mission
Strive To Create world-class Iron core brand
With 18 Years of industry experience, we focus on the research, development, and manufacturing of high-quality iron cores for electricity, industrial control, new energy, and automotive markets











