Nanocrystalline Cores for Current Transformers

Sep 30, 2025

Leave a message

What Is a Nanocrystalline Core

A nanocrystalline core is made from an iron-based nanocrystalline alloy produced by rapid solidification and controlled annealing, which creates an ultra-fine grain structure of about 10-20 nanometers. The material combines the high saturation induction of crystalline alloys with the high permeability and low loss of amorphous alloys, making it well suited for precision current transformer cores.

Key Features

High saturation induction of up to 1.25 T

High initial permeability of more than 120,000

Low hysteresis loss and low core loss across a broad frequency range

Excellent frequency and thermal stability

Available in split-core, epoxy-coated, and cased formats

Superior repeatability for metering and instrumentation applications

Material Properties

Property Value
Saturation Induction 1.25 T
Initial Permeability Greater than 120,000
Curie Temperature 570 degrees Celsius
Crystallization Temperature 500 degrees Celsius
Resistivity At least 130 micro-ohm centimeters
Hardness 880 HV
Ribbon Thickness 28-35 micrometers
Density 7.2 g per cubic centimeter
Stacking Factor At least 0.75

Applications

Smart grid current transformers

High-accuracy metering systems

Protection relays

Compact current transformers for PCB-mounted power systems

Power monitoring and feedback circuits

Comparison with Conventional Core Materials

Compared with grain-oriented silicon steel cores, nanocrystalline cores provide much higher permeability and lower loss at the same dimensions, which allows smaller core sizes for a given accuracy class. Compared with amorphous cores, nanocrystalline material offers higher saturation induction and better thermal stability. These properties make nanocrystalline the preferred choice for high-accuracy current transformers where the core must maintain its performance over the full rated current range.

Design Considerations

When selecting a nanocrystalline core for a current transformer, consider the accuracy class, the rated burden, the frequency range, and the required saturation margin. The core format, such as split-core for retrofit installations or epoxy-coated for PCB mounting, should match the mechanical and environmental requirements of the application.

FAQ

Q1: What is the main advantage of a nanocrystalline core in a current transformer?

Its very high permeability and low core loss allow the transformer to maintain high accuracy over a wide current range while using a smaller core, which reduces size and cost.

Q2: How does nanocrystalline material compare with silicon steel?

Nanocrystalline material has permeability several times higher and much lower core loss than grain-oriented silicon steel, enabling higher accuracy classes in smaller cores.

Q3: What does high initial permeability mean for metering accuracy?

High initial permeability means the core responds to very small magnetizing currents, which reduces ratio and phase errors at low primary currents and improves accuracy at light load.

Q4: Can nanocrystalline cores be used in protection relays?

Yes. Their high saturation induction and thermal stability ensure that the current transformer can reproduce large fault currents without excessive saturation, which is essential for reliable protection operation.

Q5: What is the Curie temperature of nanocrystalline material?

The Curie temperature is about 570 degrees Celsius, above which the material loses its ferromagnetic properties. This is well above normal operating temperatures for current transformers.

Q6: Are split-core formats available?

Yes. Split-core nanocrystalline cores are available for retrofit installation on existing conductors, allowing metering or protection to be added without disconnecting the circuit.

Send Inquiry