High-Grade CRGO Grain-Oriented Electrical Steel Coil for Distribution Transformers

Sep 26, 2025

Leave a message

What Is CRGO Electrical Steel

Cold-rolled grain-oriented steel, abbreviated as CRGO, is an electrical steel grade developed for transformer cores. Its silicon content is about 2.9% to 3.5%, and its crystal grains are aligned in the rolling direction, which gives the material preferential magnetic properties in the direction of the magnetic flux. CRGO is mainly used in power transformers, distribution transformers, and large rotating machines.

Why Grain Orientation Matters

In CRGO steel, the crystal orientation is well aligned with the rolling direction, so the material has high permeability, low magnetostriction, and low core loss when the flux travels along the rolling direction. This directional behavior is the reason why CRGO is cut and stacked so that the flux path follows the rolling direction in transformer cores.

Classification of CRGO Grades

Conventional grades, designated M3, M4, M5, and M6

High-permeability HIB grades with improved magnetic alignment

Domain-refined grades treated by laser or mechanical scratching to further reduce core loss

Thickness Options

The major thicknesses of CRGO are 0.23 mm, 0.27 mm, 0.30 mm, and 0.35 mm. A thickness of 0.20 mm is also available for some HIB and domain-refined grades. Thinner material reduces eddy current loss and is used in high-efficiency transformers.

Core Loss and Magnetic Induction

Core loss is generally specified at an induction of 1.7 T at 50 Hz or 60 Hz, and the magnetic flux density is specified at a field strength of 800 A per meter, denoted B800. Lower core loss means less energy is wasted as heat in the core, which directly improves transformer efficiency.

Specification Tables

Common Grades

Type Grade Width Max Core Loss at P1.7T/50Hz Lamination Factor % Min Induction at B800
Common 23Q110 35-1200 mm 1.10 W/kg 97.2 1.82 T
Common 23Q120 35-1200 mm 1.20 W/kg 97.2 1.82 T
Common 27Q120 35-1200 mm 1.20 W/kg 97.5 1.82 T
Common 30G120 35-1200 mm 1.20 W/kg 98.0 1.82 T

High-Induction Grades

Type Grade Width Max Core Loss at P1.7T/50Hz Lamination Factor % Min Induction at B800
High Induction B20P085 35-1200 mm 0.85 W/kg 97.0 1.86 T
High Induction B23P085 35-1200 mm 0.85 W/kg 97.2 1.88 T
High Induction B23P090 35-1200 mm 0.90 W/kg 97.2 1.88 T
High Induction B23P095 35-1200 mm 0.95 W/kg 97.2 1.88 T
High Induction B23P100 35-1200 mm 1.00 W/kg 97.2 1.88 T
High Induction B27P095 35-1200 mm 0.95 W/kg 97.5 1.89 T
High Induction B27P100 35-1200 mm 1.00 W/kg 97.5 1.89 T
High Induction B30P120 35-1200 mm 1.20 W/kg 98.0 1.89 T

Domain-Refined High-Induction Grades

Type Grade Width Max Core Loss at P1.7T/50Hz Lamination Factor % Min Induction at B800
Domain Refined B20R065 35-1200 mm 0.65 W/kg 97.0 1.86 T
Domain Refined B23R085 35-1200 mm 0.85 W/kg 97.2 1.88 T
Domain Refined B27RK085 35-1200 mm 0.85 W/kg 97.5 1.89 T

Key Characteristics of CRGO Steel

High permeability, giving increased capacity to support magnetic fields

Low magnetostriction, with low tendency to expand or contract in magnetic fields

High electrical resistivity, which lessens core loss by reducing the eddy current component

Decreased hysteresis loss, meaning less wasted energy in the form of heat from the alternating magnetizing force

Why CRGO Is Used in Distribution Transformers

Distribution transformers operate continuously, so no-load loss dominates their lifetime energy cost. Using high-grade CRGO with low specific core loss reduces the no-load loss, allows a smaller core cross-section, and lowers the operating temperature. Loss and induction testing follows methods such as those described in GB/T 2522, and the transformer itself is designed to IEC 60076 requirements.

FAQ

Q1: What does CRGO stand for?

CRGO stands for cold-rolled grain-oriented steel, an electrical steel with grains aligned in the rolling direction to optimize magnetic properties along the flux path.

Q2: What are the main CRGO grades?

CRGO is classified into conventional grades M3, M4, M5, and M6, high-permeability HIB grades, and domain-refined grades with laser treatment for the lowest core loss.

Q3: What thicknesses of CRGO are available?

Common thicknesses are 0.23 mm, 0.27 mm, 0.30 mm, and 0.35 mm, with 0.20 mm available for some HIB and domain-refined grades.

Q4: How is core loss specified for CRGO?

Core loss is specified at an induction of 1.7 T at 50 Hz or 60 Hz, expressed in W/kg, for example 0.85 W/kg for grade B23P085.

Q5: What is B800 in the specification table?

B800 is the minimum magnetic flux density measured at a field strength of 800 A per meter, indicating the magnetization capability of the material.

Q6: Why is low core loss important for distribution transformers?

Distribution transformers run continuously, so the no-load loss dominates lifetime energy cost. Low core loss reduces electricity waste, lowers temperature rise, and improves overall efficiency.

Send Inquiry