Amorphous Cores: The Impact On The Transformer Industry

Oct 17, 2025

Leave a message

Amorphous Core

 

Compared with lower, conventional crystalline magnetic cores, these amorphous metal cores have higher magnetic characteristics and a superior design. They are used as the core material in AC, DC reactors, Common Mode Chokes, High-Frequency Low Loss Transformers, etc.

Amorphous metal cores can operate at a flux level of 1.56 Tesla, whereas a typical ferrite core can only operate at 0.49 Tesla. Other than that, the permeability of a common ferrite core differs greatly from that of an amorphous core.

A type of these amorphous metal cores is the Nanocrystalline core which has the highest permeability and frequency. They are used as EMC filters.

Amorphous Cores: The Impact On The Transformer Industry

 

Amorphous C-cores: Reforming Transformer Industry

 

The C-core is significantly used in DC inductors and AC reactors ranging from 10 to 1000+ Amperes. They are wrapped in a 'C-core configuration,' which is why they are known as the Amorphous Powerlite C-cores.

 

Traditional steel cores operate at low flux densities along with increased frequency. On the other hand, the Amorphous Powerlite C-cores are best when it comes to operating at higher frequencies but at the same flux level.

 

 

Different Types Of Amorphous Cores:

 

1. Fe-based Amorphous Toroidal Cut Core

Toroidal cut cores are Metglas cores made with iron-based Metglas. They have a great high saturation induction and a high permeability, allowing the use of smaller sizes coated with boxed cores.

 

These Fe-based amorphous toroidal cut cores need flyback transformers, DC inductors, and PFC boost chokes for applications.

 

2. Fe-based Amorphous Rectangular Cut Core

These rectangular cut cores have many outstanding properties. They have a high saturate induction which allows the core volume to decrease.

It also has an air cap that assists the DC bias property. It also has a low core loss, which allows low-temperature rise. Last but not least, the most important feature, its rectangular form, makes mounting the coil easier.

 

3. Fe-based Amorphous Filter Inductor Cores

Fe-based amorphous filter cores have properties such as high frequency, low core loss, permeability range, and stable inductance.

It has a very high saturation flux density and an excellent Anti-DC bias property. It only needs fewer winding turns. Not only that, but it has excellent conductivity; however, this is a costly component.

 

The nanocrystalline core has some of the best features, such as good filter effectiveness, small volumes and sizes, and fewer turns of copper wire.

 

4. Anti-DC Hybrid Current Transformer Core

This anti-DC hybrid current transformer core comprises an amorphous alloy core and a nanocrystalline core. This can detect the AC signal accurately while resisting the DC component.

 

These anti-DC hybrid current transformer cores highly resist DC performances and have the best temperature characteristic. It also has a high-cost performance. To install this core, two important things are required; the energy meters and electric power system measurement.

 
 

Amorphous Cores specification

Amorphous Cores: The Impact On The Transformer Industry

Magnetic core size(mm) Protective box size(mm) Effective cross-sectional area Ae(mm2) Magnetic path length Ie(mm) Maximum DC
overcurrent class
(A)
id od ht ID OD HT
14 19 6.5 12 22 8 11.86 51.81 20
14 20 10 12 22.3 11.4 29.68 52.29 40
16 21 10 15 24 12.3 24.85 57.41 60
16 23 8 15 24 9.7 20.44 61.23 60
16 23 10 15 24 12.3 34.62 59.92 60
17 22 10 15.3 24.4 12.3 24.86 60.59 60
17 21 8 15.3 24 9.7 25.56 60.67 60
17 23 8 15.3 24.4 9.7 26.89 61.34 60
18 23 10 16.4 24.4 12.3 29.78 60.38 70
18 24 9 16.4 25 11.2 34.78 60.89 70
18 25 10 16.4 25.9 12.3 37.97 64.56 70
19 24 9 17.3 25 11.2 40.39 65.32 80
19 25 10 17.3 26 12.3 39.42 62.31 80
19 26 10 17.3 27.3 12.3 48.32 69.56 80
20 25 10 18.5 26.3 12.3 39.29 70.32 90
20 28 10 18.5 29 12.3 45.76 73.88 90
20 32 10 18.5 32.3 12.3 58.91 78.75 90
21 29 10 18.2 31.3 12.3 39.65 77.19 100
21 26 8 18.3 27.4 9.7 46.54 78.32 100
21 28 10 18.3 30 12.3 50.39 77.45 100
22 28 10 20.5 30 12.3 49.32 79.89 120
22 32 10 20.5 33.4 12.3 43.58 73.43 120
23 32 10 21.3 33.4 12.3 44.56 74.56 120

 

 

GNEE Featured Products

Gnee provides premium iron cores to the world. Our cores can be selected in a wide range of materials, shapes, applications, manufacturing techniques, etc., to meet customers' diverse demands. Explore our wide product range now~

Manufacturing Process

 

Raw Material Sourcing

1. Raw Material Sourcing

Slitting

2. Slitting

Punching

3. Punching

Laminating

4. Laminating

Core Forming

5. Core Forming

testing

6. testing

GNEE New Material

Founded in 2008 and located in Anyang in China, GNEE New Material is a high-tech enterprise specializing in researching and manufacturing iron core products.
The company currently occupies over 20,000 square meters and employs more than 200 people, including over 80 professionals. After more than 18 years of development, we have built our own magnetic material production base and independently develope, produce, and sell various kinds of iron cores. The common types include silicon steel cores, motor cores, transformer cores, toroidal iron cores, special-shaped cores, custom cores, and others. Our cores are widely applied in different sectors including transformers, motors, mutual inductors, voltage stabilizers, welding machines, magnetic amplifiers, and instrumentation, providing diverse core solutions to global customers.

GNEE New Material

30+

Types of Products

18k+

Happy Clients

 

 

 

Why Choose GNEE New Material?

 

GNEE New Material was founded in 2008, which is a National High-tech Enterprise & Famous Brand Enterprise in China, developing into a professional manufacturer and supplier of high-quality iron cores.

 

18+

Over 18 years of success in the iron core industry;
National High-tech Enterprise & Famous Brand Enterprises in China;

 
 

200+

Over 200 employees;
The R&D team has more than 80 experienced engineers and the production team has more than 100 skilled staffs;

 
 

35+

Annual turnover up to 35 million dollor per year;
Owns many sets of highly automatic winding, annealing, and assembling machines;

 
 

1,000+

Over 1000 customers in domestic and overseas markets;
core Products are exported to more than 70 countries in the world;

 

GNEE New Material Factory Overview

GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory
GNEE New Material Factory

Meet Our Sales Manager

 

"The Core of the Iron Core, the Power of Leadership" - See Our Great Decision-Makers Deeply Engaged in the Magnetic Materials Industry.

CEO

Edison Zhang

CEO

General Manager

Kelly Zhang

General Manager

Sales Manager

Alex Cao

Sales Manager

 

 

Industries Served

 
Automobile Industry

Automobile Industry

New Energy

New Energy

Motor Applications
Motor Applications
Transformer Applications

Transformer Applications

modular-1

Our Mission

Strive To Create world-class Iron core brand

With 18 Years of industry experience, we focus on the research, development, and manufacturing of high-quality iron cores for electricity, industrial control, new energy, and automotive markets

Send Inquiry