250 kVA Liquid-Immersed Transformer: Applications in Factories and Commercial Centers

Feb 03, 2026

Leave a message

Overview

The 250 kVA liquid-immersed transformer serves the power distribution needs of medium-scale factories and commercial centers, stepping medium voltage down to the utilization level of 0.4 kV. Design and testing follow IEC 60076 and GB 1094. This guide covers the application scenarios, the sizing logic, and the installation and maintenance essentials for this rating.

Typical Specifications

Rated power: 250 kVA

Voltage classes: 10 kV / 11 kV / 20 kV primary, 0.4 kV secondary

Connection group: Dyn11

Cooling: ONAN

Reference losses for the S11 type at 20 kV class: no-load loss 400 W, load loss 3350 W, no-load current 1.2%

Application Scenarios

Medium-scale factories

A factory with a workshop floor of a few thousand square meters and a maximum demand between 200 and 280 kVA is a typical fit. Loads include production lines, compressors, pumps, and lighting. The unit is usually installed in a dedicated transformer room or a compact substation.

Commercial centers

Shopping streets, supermarkets, and small malls use the 250 kVA class for base load: lighting, refrigeration, escalators, and tenant supplies. The liquid-immersed design gives a stable temperature during the long operating hours of retail businesses.

Mixed-use and institutional sites

Schools, clinics, and community facilities with moderate load and a need for reliability use this rating as the main supply or as a backup feed with a generator changeover.

Sizing and Load Planning

Measure the actual maximum demand with a logger before sizing, where possible.

Apply a diversity factor to the connected load; the transformer is normally operated at 60-80% of rating for efficiency and life.

Add a growth margin of 10-20% where the site is expected to expand.

If the demand regularly approaches 250 kVA, consider a 315 kVA unit instead of running the transformer at full load.

Installation and Safety

Ventilate the transformer room so the temperature rise stays within the design limit.

Separate the transformer from combustible material and provide oil containment where regulations require.

Earth the tank and neutral correctly; fit surge arresters on the HV side for overhead supplies.

Provide clear access for inspection, oil sampling, and switchgear operation.

Maintenance and Monitoring

Check oil level and temperature monthly.

Test oil annually with dissolved gas analysis and physical tests per IEC 60422.

Check the tightness of connections and bushing condition during annual shutdowns.

Record load data to detect long-term drift toward the rating limit.

Frequently Asked Questions

How do I know if 250 kVA is the right size?

Calculate the maximum demand with a diversity factor; if the result is between 200 and 280 kVA with a small growth margin, 250 kVA is appropriate.

Can a 250 kVA unit feed both a factory and an office?

Yes, but keep the office supply on a separate low-voltage feeder and protect it so that a workshop fault does not interrupt office loads.

Is a dry-type transformer better for a commercial center?

Dry-type units are chosen where fire codes restrict oil indoors; otherwise a liquid-immersed unit is more economical and more efficient at this rating.

What is the expected service life?

With proper maintenance and moderate loading, 20-25 years is typical for liquid-immersed distribution transformers.

Does the connection group matter for a mixed load?

Yes, Dyn11 handles unbalanced single-phase loads better than Yyn0 and keeps the neutral voltage stable.

What spares should a site keep?

Spare fuses, gaskets, a sampling kit, and a thermometer; a spare low-voltage breaker is useful for critical sites.

Send Inquiry