125 kVA Omni-Sealed Oil-Immersed Power Transformer: Features and Specifications
Oct 30, 2025
Leave a message
What Is an Omni-Sealed Oil-Immersed Transformer?
An omni-sealed (fully sealed) oil-immersed transformer is a distribution transformer whose oil tank is hermetically closed. Instead of a conservator with a silica-gel breather, the tank wall is built from corrugated steel panels that flex elastically as the oil expands and contracts with load and ambient temperature. Because the oil never contacts outside air, moisture ingress and oil oxidation are minimized, which slows insulation aging and raises operational reliability. The S11-M series implements this design for ratings from 30 kVA upward.
Design and Working Principle
The active part is the same as in a conventional oil-immersed transformer: a CRGO stacked core, concentric copper or aluminum windings, and an off-circuit tap changer mounted on the tank cover. The difference is the tank. The corrugated wall radiates heat and absorbs oil volume changes by elastic deformation, while the sealing prevents breathing, so the unit needs no oil storage tank and no desiccant maintenance. Total enclosure also keeps dust and humidity out of the oil, which is valuable in polluted or coastal sites.
Key Features and Benefits
Low no-load and load losses with low noise, meeting the S11 loss class of GB/T 6451 for good energy savings.
Good internal heat dissipation and strong short-circuit resistance from the robust core and winding structure.
Low load loss and low no-load current improve efficiency across the whole load range.
Reliable sealing gives a long service life with essentially maintenance-free operation.
Reduced environmental impact: less oil oxidation means fewer oil changes and no sludge.
Working Conditions
Maximum ambient temperature: +50 C (in special scenarios, air-conditioned enclosures can be provided).
Minimum ambient temperature: -25 C.
Altitude: below 4000 m.
Maximum monthly average relative humidity: 80% at 20 C.
Installation: indoor or outdoor, away from fire and explosion hazards, heavy fouling, chemical corrosion and violent vibration.
Technical Parameters (S11 Series)
The table shows standard S11-M fully sealed data for the lower ratings of the series; the 125 kVA unit follows the same construction with parameters confirmed against the selected loss class during engineering review.
| Rating (kVA) | Vector group | HV / LV (kV) | No-load loss (W) | Load loss (W) | No-load current (%) | Weight (kg) | Dimensions LxWxH (mm) | Impedance (%) |
|---|---|---|---|---|---|---|---|---|
| 30 | Yyn0 or Dyn11 | 6, 6.3, 10, 10.5, 11 / 0.4 | 100 | 600 | 2.3 | 340 | 730x780x930 | 4.0 |
| 50 | Yyn0 or Dyn11 | 6, 6.3, 10, 10.5, 11 / 0.4 | 130 | 870 | 2.0 | 440 | 800x750x965 | 4.0 |
| 63 | Yyn0 or Dyn11 | 6, 6.3, 10, 10.5, 11 / 0.4 | 150 | 1040 | 1.9 | 490 | 820x780x970 | 4.0 |
| 80 | Yyn0 or Dyn11 | 6, 6.3, 10, 10.5, 11 / 0.4 | 180 | 1250 | 1.9 | 580 | 840x800x1000 | 4.0 |
HV tapping range is ±5% or ±2×2.5%. Ratings above 80 kVA, including the 125 kVA model, use the same tank and core family with values specified at inquiry.
Standards and Quality Control
Manufacture and testing follow GB/T 6451 for loss and performance classes, the GB 1094 series and IEC 60076-1/-2/-3 for general requirements, temperature rise and dielectric performance. Routine tests cover turns ratio, vector group, impedance, no-load and load losses, induced overvoltage and dielectric withstand.
Application Scenarios
Rural and urban distribution networks, industrial and mining enterprises, commercial complexes and renewable auxiliary supplies - wherever a 125 kVA-class step-down from 6, 10 or 11 kV to 0.4 kV is required with minimum maintenance.
Frequently Asked Questions
What does omni-sealed mean?
It means the tank is hermetically closed: the oil is fully isolated from atmospheric air, so there is no breathing, no moisture absorption and no oil oxidation from air contact.
How does the corrugated tank compensate oil expansion?
The corrugated steel panels act as elastic bellows. When the oil heats up and expands, the panels flex outward; when it cools, they return, keeping the internal pressure within a safe range without exchanging air.
What are the advantages over a conservator transformer?
No oil storage tank and desiccant maintenance, slower oil and insulation aging, less contamination ingress, smaller footprint and lower lifetime care cost.
Can it be installed outdoors?
Yes. The unit is designed for both indoor and outdoor installation as long as the site meets the working conditions listed above.
What maintenance is required?
Very little: periodic inspection of bushings, oil level and thermometer, plus oil sampling and dissolved gas analysis according to IEC 60422. No conservator or breather care is needed.
What customization is possible?
Voltage combinations, tapping range, impedance, vector group, oil type and enclosure options can be adapted to the project specification and confirmed at inquiry.

