Site Preparation For Power Transformer Installation
Feb 06, 2024
Leave a message
GNEE New Material power transformer
Site Preparation for Power Transformer Installation
Power transformers play an important role in transmitting and distributing electrical power in power systems. Its functions are to step up or step down the voltage level, improve the power quality, and isolate different parts of the network.
This article will provide a standard guide on how to prepare the site for installing a power transformer.
Table of content
Standard test
Site Preparation
Cleaning and drying of components
Standard Test
Ratio test
Polarity test
Phase relation test
Excitation current test
Impedance test
Load loss test
Regulation test
Applied potential test
Induced potential test
Impulse test
Sound test
Corona test
Insulation resistance test
Dissolved gas analysis
Temperature rise test
single phase power transformer
Site Preparation
It is relatively important to select and prepare the site for installing a power transformer. There are some following factors when choosing and preparing a site for power transformer installation:
• Accessibility: It is easily accessible to the site by road or rail for transportation and delivery of the transformer and its components.
• Fire protection: It is necessary to equip fire protection measures on the site to prevent or control fire hazards from the transformer.
• Foundation: The site should have a strong and level foundation
• Noise: The site should reduce noise pollution from the transformer to nearby residential or office areas.
• Clearance: The site should provide adequate clearance from the earth and other live parts for all live parts of the transformer, such as bushings, terminals, tap changers, etc.
• Ventilation: The site should provide sufficient ventilation for natural or forced cooling of the transformer.
Cleaning and Drying of Components
Before installing a power transformer, the components of the power transformer should be cleaned and dried. The following procedures should be followed for cleaning and drying power transformer components:
Main tank
Core and windings
Bushings
Conservator tank
Radiators
By following this guide, operators can ensure that the power transformer is installed properly and safely and that it performs efficiently and reliably in the power system.