Cold Rolled Non Grain Oriented Silicon Steel-CRNGO Electrical Steel
Dec 08, 2023
Leave a message
GNEE'S Cold rolled non oriented electrical steel
CRNGO fully processed steels are iron-silicon alloys with varying silicon contents and have similar magnetic properties in all directions in plan of the sheet. Non-oriented Electrical steel are principally used for motors, generators, alternators, ballasts, small Transformers and a variety of other electromagnetic applications.Our cold rolled (non) grain oriented steel (CR(N)GO) is mainly sourced from China. In CRGO, CRNGO has similar magnetic properties in grain orientation as well as in the other directions. It is used for producing generators and small electrical motors.
Cold rolled non grain oriented strips
Iron-silicon alloys with varying silicon contents that have similar magnetic properties in all directions in plan of the sheet. Non-oriented Electrical steel is principally used for motors, generators, alternators, ballasts, small transformers and a variety of other electromagnetic applications.
Cold rolled non-grain-oriented sheets
Iron-silicon alloys with varying silicon contents that have similar magnetic properties in all directions in plan of the sheet. Non-oriented Electrical steel is principally used for motors, generators, alternators, ballasts, small transformers and a variety of other electromagnetic applications.
Cold rolled non grain oriented electrical steel coils
Iron-silicon alloys with varying silicon contents that have similar magnetic properties in all directions in plan of the sheet. Non-oriented Electrical steel is principally used for motors, generators, alternators, ballasts, small transformers and a variety of other electromagnetic applications.
| Goods | Norminal Thickness (mm) | Conventional Density kg/dm3 | Iron Loss P1.5/50 W/kg | MaximumMagnetic Flux Density B50 T | Coating Type |
|---|---|---|---|---|---|
| CRNGO | 0.35mm | 7.6 | ≤2.50 | ≥1.62 | M11 |
| 7.65 | ≤2.70 | ≥1.62 | M11 | ||
| 7.65 | ≤3.00 | ≥1.62 | M11 | ||
| 7.65 | ≤3.30 | ≥1.62 | M11 | ||
| 7.65 | ≤3.60 | ≥1.62 | M11 | ||
| 7.65 | ≤4.00 | ≥1.63 | M11 | ||
| 7.7 | ≤4.40 | ≥1.64 | M11 | ||
| 7.75 | ≤5.50 | ≥1.64 | M11 | ||
| 0.50mm | 7.65 | ≤3.10 | ≥1.62 | M11 | |
| 7.65 | ≤3.30 | ≥1.62 | M11 | ||
| 7.65 | ≤3.50 | ≥1.62 | M11 | ||
| 7.7 | ≤4.00 | ≥1.63 | M11 | ||
| 7.7 | ≤4.70 | ≥1.64 | M11 | ||
| 7.7 | ≤5.30 | ≥1.65 | M11 | ||
| 7.75 | ≤6.00 | ≥1.66 | M11 | ||
| 7.8 | ≤7.00 | ≥1.69 | M11 | ||
| 7.8 | ≤8.00 | ≥1.70 | M11 | ||
| 7.85 | ≤10.00 | ≥1.72 | M11 | ||
| 7.85 | ≤13.00 | ≥1.74 | M11 | ||
| 0.65mm | 7.8 | ≤8.00 | ≥1.69 | M11 | |
| 7.85 | ≤10.00 | ≥1.69 | M11 | ||
| 7.85 | ≤13.00 | ≥1.69 | M11 |
High Efficiency CRNGO
| Goods | Norminal Thickness (mm) | Conventional Density kg/dm3 | Iron Loss P1.5/50 W/kg | MaximumMagnetic Flux Density B50 T | Coating Type |
|---|---|---|---|---|---|
| CRNGO | 0.50mm | 7.75 | ≤4.70 | ≥1.72 | M11 |
| 7.75 | ≤6.00 | ≥1.72 | M11 | ||
| 7.8 | ≤8.00 | ≥1.74 | M11 |



