A Brief History Of Silicon Steel
Feb 25, 2023
Leave a message
In 1900, R.A. Hadfield reported that iron-silicon alloys with a silicon content of 2.5%~5.5% have higher magnetism than iron. In 1903, the production of hot-rolled silicon steel sheets began. In 1934 GossN P developed (110) [001] cold-rolled oriented silicon steel, along the direction of steel plate rolling significantly increased magnetism, suitable for the production of transformers, in 1935 the American Armco steel company began production, and then produced cold-rolled non-oriented silicon steel. In 1949, Amco made 0.05mm and 0.1mm thick cold-rolled oriented silicon steel thin strips for use in the military industry. In the early 60s, the United States began to produce low-carbon electrical steel with a silicon content of < 0.5% in large quantities. At the end of the 60s, some countries gradually stopped producing hot-rolled silicon steel. In 1968, Nippon Steel developed and produced highly magnetic inductive oriented silicon steel (Hi-B steel). In the mid-70s, Japan successively developed several new grades of oriented silicon steel, non-oriented silicon steel and low carbon electrical steel. In 1986, Japan Steel Pipe Company produced high silicon steel products with a silicon content of 6.5%. China produced hot-rolled silicon steel in 1954, cold-rolled oriented silicon steel thin strip in 1959, and cold-rolled oriented and non-oriented silicon steel in 1979. The annual output of the world's electrical steel is more than 6 million tons, accounting for 0.9%~1.3% of the total steel output. Japan, the former Soviet Union and the United States all have an annual output of more than 1 million tons, of which oriented silicon steel accounts for about 25%, and low-carbon low-silicon electrical steel accounts for about 65%.

