0.08mm Silicon Steel Ultra-thin Ribbon Wound Laminated Core

Nov 23, 2023

Leave a message

GNEE New Material

In recent years, the global environment has faced more severe challenges, and it is urgent to improve motor efficiency and reduce motor losses. In addition, with the rise of new mobile technologies, the use environment and specification requirements of motors have also changed, requiring smaller motors and higher power output. In order to meet these requirements, increasing the speed of the motor has become a solution. Even for small motors, the output power can be increased by increasing the speed. However, as the rotational speed increases, the iron loss of the motor core will also increase sharply, resulting in a decrease in efficiency.
The motor core is usually made of non-oriented electrical steel plate, with standard plate thicknesses of 0.5mm and 0.35mm. The reason for choosing this material is that the high-speed rotation of the motor is related to the high frequency of the magnetic field in the iron core, and the iron loss of the electrical steel plate will increase as the frequency increases. This is mainly due to eddy current losses. Eddy current losses can be expressed in terms of frequency, magnetic flux density and the square of the plate thickness.
In order to suppress the increase in iron loss caused by frequency, ultra-thin electrical steel sheets have been developed, which can greatly reduce the increase in eddy current loss relative to frequency while maintaining the high saturation magnetic flux density and other characteristics of non-oriented electrical steel sheets. It is reported that ultra-thin electrical steel plates are made by re-rolling existing non-oriented electrical steel plates. The development of this ultra-thin electrical steel plate is expected to play an effective role in fields such as small high-speed motors.
However, there are still difficulties in manufacturing wide ultra-thin electrical steel plates. How to effectively use ultra-thin electrical steel plates to manufacture large motor cores has become a problem. To this end, an extremely thin electrical steel strip coil core called a "wound laminated core" has been developed, which can achieve the goal of large motor cores even with a narrow width. The plate thickness of this type of iron core is only 0.08mm, which is very thin and can be made into a coiled shape. By increasing the number of windings, larger dimensions relative to the radial direction can be achieved.
Generally speaking, "wound electrical steel core" refers to a core produced by winding existing electrical steel sheets, while "wound laminated core" refers to a core formed by winding ultra-thin electrical steel strips of thin plate thickness. This type of core maintains insulation between layers by wrapping extremely thin electrical steel tape with an insulating coating.
At present, although a method of wrapping the iron core with thinner amorphous materials has been developed, since the amorphous material itself does not have an insulating coating, it cannot maintain the interlayer insulation performance of the iron core. In contrast, a wound laminated core is wrapped using extremely thin electrical steel tape with an insulating coating so that the insulation between the layers is maintained.

Electrical steel coil

electrical steel


Researchers including Daisuke Wakabayashi of Nippon University of Arts and Sciences studied the changes caused by core structure by comparing the structures of wound laminated cores and conventional laminated cores. At the same time, through the evaluation of ultra-thin electrical steel strip wrapped laminated core materials of different thicknesses, the optimal thickness and manufacturing conditions to further reduce iron loss were explored.
They believe that a wound laminated core made of newly developed ultra-thin electrical steel strips has magnetic properties comparable to conventional laminated cores. By increasing the number of windings, radial dimensions can be achieved, which helps reduce losses and size of high-speed rotating machines.

Therefore, one can provide iron cores of different sizes, further expanding the range of effective utilization of ultra-thin electrical steel plates. In particular, the laminated core with a plate thickness of 0.08mm can maintain low iron loss and high magnetic permeability in the frequency range of 50Hz to 1kHz, and is the most suitable core material to reduce hysteresis loss and eddy current loss.

Send Inquiry