What are the structures of dry-type transformers?

Mar 12, 2024

Leave a message

The structure of dry-type transformers is divided into three parts: open type, closed type, and pouring type.

 

1. Open type: It is a commonly used form. Its body will be in direct contact with the atmosphere. It is usually used in a clean room without dust influence. (When the ambient temperature is 20 degrees, the relative humidity should not exceed 90%). Generally, there are Air self-cooling and air-cooling two cooling methods.

2. Closed type: the dry-type transformer is enclosed by a casing, and does not directly contact the external environment. Usually, the corresponding casing is equipped according to the protection level.

3. Casting type: cast with epoxy resin. After casting, the overall mechanical strength of the casting coil is good, and the ability to withstand short circuit is strong.

indoor dry type transformer

outdoor dry type transformer

Send Inquiry