Advantages of Three-Phase Oil-Immersed Transformers: Design and Operation

Jan 15, 2024

Leave a message

Design Overview of the Three-Phase Oil-Immersed Transformer

A three-phase oil-immersed transformer is fully filled and sealed with insulating oil. The core and windings sit inside a corrugated tank whose elastic walls absorb the thermal expansion of the oil, so the unit is a permanently sealed tank without an oil conservator in many modern designs. The main components are the closed iron core, the windings on the core limbs, the tank, bushings, radiators, tap changer, gas relay, thermometer, and oil purification fittings. The corrugated design reduces the overall height of the transformer and isolates the oil from the outside atmosphere.

Winding and Core Construction

The low-voltage winding generally uses a cylindrical structure wound with copper foil, except for very small capacities where copper wire is used; this gives high mechanical strength and good heat transfer.

The high-voltage winding uses a multi-layer cylindrical structure that balances the ampere-turn distribution along the winding axis.

Balanced ampere-turns result in small magnetic flux leakage, high mechanical strength, and strong short-circuit withstand capability.

These construction details directly improve the reliability of the transformer under overload and fault conditions, which is a major reason oil-immersed units dominate distribution networks.

Mechanical and Transport Durability

The core and windings of a three-phase oil-immersed transformer are tightened separately. The height-adjusting parts and the low-voltage lead supports are fitted with self-locking anti-loosening nuts, and a non-hanging structure is used so that the internal assembly does not rely on suspended supports. This construction allows the transformer to withstand the shock and vibration of road and sea transport without loosening, reducing the risk of damage before installation.

Vacuum Drying and Oil Filling

Moisture is the most damaging contaminant in transformer insulation. The coil and core are dried in vacuum, and the transformer oil is filtered and injected under vacuum, so the residual moisture inside the transformer is reduced to a very low level. This process preserves the dielectric strength of the paper insulation and the oil, which is the foundation of the transformer's long service life.

Cooling and Sealing Advantages

The corrugated tank provides a breathing function that compensates for the volume change of the oil with temperature, so a separate oil conservator is not required.

Eliminating the conservator reduces the overall height of the transformer, which simplifies installation in limited spaces.

Because the oil is isolated from the outside air, oxygen and moisture cannot enter and degrade the insulation, so the dielectric performance is maintained over time.

Oil Quality and Filtration

During service, the oil performs two duties: electrical insulation and heat dissipation. The oil in an operating transformer is exposed to external impurities, contact with air at the surface, and high operating temperature, all of which degrade its quality. Routine oil testing checks the acid value, water-soluble acid content, breakdown voltage, and appearance. When the oil becomes dirty, the cooling circuit inside the radiators can be blocked, which impairs cooling and can lead to overheating and severe failure. Periodic oil filtration and, when necessary, oil regeneration or replacement are therefore essential maintenance tasks, guided by the limits of IEC 60422.

Frequently Asked Questions

Why are three-phase oil-immersed transformers sealed with a corrugated tank?

The corrugated walls flex elastically to absorb the thermal expansion of the oil, keeping the tank permanently sealed without a conservator, which lowers the height and protects the oil from air and moisture.

What is the advantage of copper foil low-voltage windings?

Copper foil windings provide high mechanical strength, uniform current distribution, and efficient heat transfer, which improve short-circuit withstand capability and cooling.

Why is vacuum oil filling important?

Vacuum drying and vacuum oil filling remove moisture from the insulation system, preserving dielectric strength and preventing premature insulation aging.

How often should transformer oil be tested?

Routine testing is typically performed annually or according to the utility's maintenance program, checking breakdown voltage, acidity, water content, and dissolved gases per IEC 60422.

Does the sealed design mean the oil never needs maintenance?

No. Even in sealed tanks, oil quality changes with temperature and aging, so periodic sampling, filtration, and verification of dielectric strength remain necessary.

What causes oil-immersed transformer overheating?

Overload, blocked cooling circuits, dirty oil, or degraded insulation can all raise the temperature. The gas relay and thermometer provide early warning of developing faults.

Send Inquiry