CRGO Grain-Oriented Silicon Steel Lamination Core for Transformers
Sep 28, 2025
Leave a message
Grain-oriented silicon steel, commonly abbreviated as CRGO, is the standard core material for power and distribution transformers. It is used because silicon steel is a magnetic material with high permeability: in an energized coil it produces a large magnetic induction, which allows the transformer to be smaller for the same power. This article explains the material properties of CRGO, its role in transformer performance, the available grades, and the capabilities of lamination core manufacturing.
Why Silicon Steel Is Used for Transformer Cores
CRGO steel has high electrical resistivity and high magnetic properties along the rolling direction. It reduces core losses in transformers and improves corrosion resistance. Because the core makes up the bulk of the transformer, the material used must be integral to the overall performance. The iron core of a transformer is laminated to reduce eddy currents, which are the small circulating currents induced by the changing magnetic field created by the alternating current in the first coil. Thin laminations with an insulating coating between them confine these currents and keep the core loss low.
Material Properties
High magnetic permeability: the material carries high magnetic flux density with low magnetizing force along the rolling direction, which improves the efficiency of electrical energy transmission.
Low core loss: hysteresis and eddy current losses are minimized by the addition of silicon, which raises resistivity, and by a manufacturing process that aligns the grains in a regular pattern.
High electrical resistivity: the silicon content reduces eddy current generation and therefore eddy current loss.
Good mechanical properties: high mechanical elasticity allows the core to withstand mechanical stress and vibration while keeping a stable shape during operation.
High degree of orientation: the grains are highly oriented in the rolling direction, which optimizes magnetic performance along that direction.
Role in Transformer Performance
Reducing energy loss: low core loss improves transformer efficiency, lowers operating cost, and minimizes energy waste.
Enhancing magnetic flux transmission: high permeability allows efficient conversion and transmission of electrical energy and stable operation of the power system.
Minimizing size and weight: less core material is needed for the same power rating, saving space and cost.
Reducing noise and vibration: low magnetostriction reduces noise and vibration during operation, improving stability and reducing the impact on the surroundings.
Available Grades
The tables below list common, high-induction, and domain-refined grades of grain-oriented silicon steel with typical core loss and induction values at 50 Hz.
| Grade | Width (mm) | Max Core Loss at 1.7 T/50 Hz (W/kg) | Lamination Factor (%) | Min Induction at B800 (T) |
|---|---|---|---|---|
| 23Q110 | 35-1200 | 1.10 | 97.2 | 1.82 |
| 23Q120 | 35-1200 | 1.20 | 97.2 | 1.82 |
| 27Q120 | 35-1200 | 1.20 | 97.5 | 1.82 |
| 30G120 | 35-1200 | 1.20 | 98.0 | 1.82 |
| B23P085 | 35-1200 | 0.85 | 97.2 | 1.88 |
| B27P100 | 35-1200 | 1.00 | 97.5 | 1.89 |
| B20R070 | 35-1200 | 0.70 | 97.0 | 1.86 |
| B23R085 | 35-1200 | 0.85 | 97.2 | 1.88 |
| B27RK085 | 35-1200 | 0.85 | 97.5 | 1.89 |
Grades beginning with Q are conventional grain-oriented types, P grades are high-induction types, and R grades are domain-refined laser-treated types with the lowest core loss. Values are reference data and the applicable grade should be agreed for each transformer design.
Lamination Core Manufacturing Capabilities
Maximum weight of automatically stacked core: 60 tons.
Maximum weight of manually stacked core: 120 tons.
Gap limit at the joint: less than 1 mm.
Window height precision: plus or minus 1 mm.
Window width precision: plus or minus 1 mm.
Typical Applications
Power transformers for transmission and distribution, from large units to small and medium distribution transformers.
Electronic transformers such as switch-mode power supply transformers, audio transformers, and pulse transformers.
Reactors, motors, generators, instrument transformers, and magnetic amplifiers.
Frequently Asked Questions
Q1. What does CRGO mean?
CRGO stands for cold-rolled grain-oriented silicon steel. The grains are oriented in the rolling direction to maximize magnetic permeability and minimize core loss along that direction.
Q2. Why is the transformer core laminated?
Laminating the core into thin sheets with insulating coatings breaks the path of eddy currents induced by the alternating magnetic field, which reduces eddy current loss and heating.
Q3. What is the difference between conventional and high-induction grades?
High-induction grades such as B23P085 offer lower core loss and higher magnetic induction than conventional grades such as 23Q120, which reduces the core size and weight of the transformer.
Q4. What is domain refinement?
Domain-refined grades are treated with a laser or other process to subdivide the magnetic domains, which further reduces hysteresis loss. These grades have the lowest core loss values.
Q5. What is a lamination factor?
The lamination factor is the ratio of the actual magnetic cross-section to the geometric cross-section of the core stack. Higher values indicate thinner insulating coatings and a more effective core.
Q6. How large a lamination core can be produced?
With automatic stacking, cores up to 60 tons can be produced, and manually stacked cores up to 120 tons, with joint gaps below 1 mm and window precision of plus or minus 1 mm.

