Pole Mounted Mild Steel Distribution Power Transformers
video

Pole Mounted Mild Steel Distribution Power Transformers

Gnee offers single - phase, overhead, pole - mounted mild steel distribution power transformers with capacities of 50 kVA and 333 kVA, and a nominal voltage ratio of 7200/240V.
Send Inquiry
Chat Now

Description

Technical Parameters

Henan GNEE Electric Co., Ltd. is one of the leading manufacturers and suppliers of pole mounted mild steel distribution power transformers in China, also supports customized service with low price. Welcome to buy discount pole mounted mild steel distribution power transformers for sale here from our factory. If you have any enquiry about pricelist, please feel free to email us.

 

Advantages of Single - Phase Oil - Immersed Transformers

Single phase power pole mounted distribution transformers offer several benefits:

Versatile Load Supply: They can operate alone to power a single - phase load. Alternatively, they can be part of a three - unit transformer bank to supply a three - phase load.

Flexible Mounting Options: These pole transformers can be directly mounted on a wooden or concrete pole. In the case of three - phase applications, they can be clustered and mounted on a single pole.

Wide - ranging Applicability: Designed primarily for residential overhead distribution loads, they are also well - suited for light commercial loads, industrial lighting, and various other electrical applications.

 

Product video

 

Product component

Single-phase Pole Mounted Transformer

 

Scope of supply

Type: Single-Phase, Overhead Type, Pole Mounted Mild Steel Distribution Power Transformers

Capacity: 50kVA & 330 kVA

Nominal Voltage Ratio: 7200/240V

BIL of Primary Winding: 95kV

BIL of Secondary Winding: 30kV

Cooling Method: Oil Filled

Bushings: Porcelain

Full Capacity high voltage winding taps are required.

Tap Configuration: One at rated voltage – nominal tap; Four – 2 ½"taps below rated voltage

The transformer's impedance voltage shall not exceed 2.5%

Transformer shall have Support Lugs (mounting brackets)

 

Technical spec for single - phase, overhead, pole - mounted mild steel distribution power transformer

Rated Power

Primary Voltage

Secondary Voltage

No load loss (W)

Load loss (W)

3 KVA

6KV 6.66KV. 6.35KV 7.2KV 7.6KV 10KV 11KV 13.2KV 13.8KV

120/240V 240/480V 139/277V 120/208V 600V

9

45

5 KVA

19

75

10 KVA

36

120

15 KVA

50

195

25 KVA

80

290

37.5 KVA

105

360

50 KVA

135

500

75 KVA

190

650

100 KVA

210

850

167 KVA

350

1410

 

General arrangement drawing

Pole mounted distribution transformer

 

finished 330 KVA Single Phase Distribution Pole Mounted Transformer

Single Phase Distribution Pole Mounted TransformerPole mounted single phase transformer

 

pole transformer environmental and system conditions:

The pole mounted single phase transformer shall be suitable for use in the following environmental and system conditions:

Environment

Climate: Tropical Marine

Ambient Temperature: Peak 40°C, Daily Average 32°C

Maximum Monthly Average Relative Humidity: 90%

Altitude: Not greater than 1000 m

System

Nominal Voltage (Line - to - Line): 12 kV

Highest Continuous Voltage (Line - to - Line): 13.2 kV

Design Basic Lightning Impulse Level: 95 kV

System Frequency: 60 Hz

Earthing: Solidly Earthed

 

50 KVA Single-phase pole mounted transformers for Pakistan

single phase pole mounted distribution transformer

Pole mounted transformer suppler

Contact now

 

 

 

Hot Tags: Pole Mounted Mild Steel Distribution Power Transformers, China Pole Mounted Mild Steel Distribution Power Transformers manufacturers, suppliers, factory, Single Phase Pole Mounted Transformers, single phase pole mounted transformer, single phase pole transformers, 50 KVA Single Phase Pole Mounted Transformer, 250 KVA Single-Phase Pole-Mounted Transformer, 250 KVA pole distribution transformer

Send Inquiry