50 KVA Single-phase Overhead Type Pole Mounted Mild Steel Distribution Power Transformer
Description
Technical Parameters
Henan GNEE Electric Co., Ltd. is one of the leading manufacturers and suppliers of 50 kva single-phase overhead type pole mounted mild steel distribution power transformer in China, also supports customized service with low price. Welcome to buy discount 50 kva single-phase overhead type pole mounted mild steel distribution power transformer for sale here from our factory. If you have any enquiry about pricelist, please feel free to email us.
single-phase overhead pole-mounted distribution transformer Description
The 50 KVA single-phase overhead pole-mounted distribution transformer with mild steel construction shall feature an impedance voltage not exceeding 2.5% and be equipped with support lugs (mounting brackets) for secure installation. The single-phase distribution transformer must include full-capacity high-voltage winding taps configured with one nominal tap at rated voltage plus four additional taps at 2.5% increments below rated voltage.
single-phase distribution transformer video
single-phase pole mounted mild steel distribution power transformer parameter
| Type | Single-Phase, Overhead Type, Pole Mounted Mild Steel Distribution Power Transformers |
| Capacity | 50kVA |
| Nominal Voltage Ratio | 7200/240V |
| BIL of Primary Winding | 95kV |
| BIL of Secondary Winding | 30kV |
| Oil Filled Bushings | Porcelain |
|
Rated Power |
Primary Voltage |
Secondary Voltage |
No load loss (W) |
Load loss (W) |
|
3 KVA |
6KV 6.66KV. 6.35KV 7.2KV 7.6KV 10KV 11KV 13.2KV 13.8KV |
120/240V 240/480V 139/277V 120/208V 600V |
9 |
45 |
|
5 KVA |
19 |
75 |
||
|
10 KVA |
36 |
120 |
||
|
15 KVA |
50 |
195 |
||
|
25 KVA |
80 |
290 |
||
|
37.5 KVA |
105 |
360 |
||
|
50 KVA |
135 |
500 |
||
|
75 KVA |
190 |
650 |
||
|
100 KVA |
210 |
850 |
||
|
167 KVA |
350 |
1410 |


Inspection of distribution transformer before operation
1. Check the single-phase overhead type pole mounted mild steel distribution power transformer certificate; if the certificate exceeds two months, the insulation resistance should be retested.
2. Check the oil level and breathing hole of the distribution power transformer; there should be no oil leakage, oil leakage and good ventilation.
3. Check whether the high and low voltage insulation bushing and relevant lead wires are intact, and whether the screws are loose.
4. Whether the position of the voltage regulating switch is correct and whether the high and low voltage fuses are suitable.
5. Lightning protection shall be complete and grounding resistance shall be measured to be qualified.
6. There should be no abnormal phenomena in cables and busbars of the single-phase overhead type pole distribution power transformer.
about us
18+ years of transformer manufacturing experience

GNEE Steel Group
Established in 2008, GNEE boasts 18 years of expertise in transformer manufacturing and export, having delivered over 50,000 units globally. With a team of 200+ professionals and 20,000 sqm facilities across Shijiazhuang, Xingtai, and Anyang, we leverage strategic locations for raw material access and supply chain efficiency. Our commitment to innovation and quality ensures high-quality distribution and power transformer for diverse industries worldwide.
Hot Tags: 50 kva single-phase overhead type pole mounted mild steel distribution power transformer, China 50 kva single-phase overhead type pole mounted mild steel distribution power transformer manufacturers, suppliers, factory, 50 KVA Single Phase Pole Mounted Transformer, pole mounted three phase transformer, 250 KVA pole mounted distribution transformer, pole distribution transformer, 3 phase pole mounted transformer, 250 KVA pole distribution transformer
Send Inquiry










