What is the PPGI steel coil specification

The following table introduces you to the specifications of PPGI steel coil

 

Item	Prepainted Galvanized Steel (Prepainted galvanized coil)
Substrate	GI (galvanized iron)
Thickness	0.1 mm -3.0 mm
Width	600 mm -1,250 mm
Length	Upon your requirements
Coatings	PE, SMP, HDP, PVDF
Colors	As per RAL Color (custom patterns are available)
Monthly Production	5,000-10,000 tons
Package	Standard Export Package

ppgi roof sheet

PPGI steel coil specifications can vary depending on the manufacturer and specific product line. However, here are some common specifications you might find:

1) PPGI Steel Material

PPGI coils are typically made from hot-dip galvanized steel or galvalume steel. The base metal provides the strength and corrosion resistance.

 

2) PPGI Steel Material

Coating Type

PPGI stands for Pre-Painted Galvanized Iron, indicating that the steel has been coated with a layer of paint or protective coating. The type of coating can vary, including polyester(PE), silicon-modified polyester (SMP), polyvinylidene fluoride (PVDF), and high-durability polyester (HDP).

3) PPGI Steel Coating Thickness

This refers to the thickness of the paint or protective coating applied to the steel. It is usually specified in micrometers (µm).

 

4)PPGI Steel Top Coat Thickness

In a PPGI coil, there are typically multiple layers of coatings. The top coat is the outermost layer, which provides additional protection and determines the final appearance of the product.

5) Back Coat Thickness

This is the coating on the reverse side of the coil. It provides added protection and can also influence the adhesion of the coating to the base metal.

 

6) PPGI Steel Width

This is the width of the PPGI coil, typically measured in millimeters (mm) or inches (in).

7) Coil Weight

This is the weight of the entire coil, including both the steel and the coating. It is usually specified in kg or ton.

 

8) PPGI Steel Paint System

This refers to the combination of coatings used in the PPGI coil. It includes information about the type of primer, topcoat, and backcoat used.

 

9)PPGI Steel Tensile Strength

This is a measure of how much force the steel can withstand before it starts to deform. It is usually specified in megapascals (MPa) or pounds per square inch (psi).

 

10)PPGI Steel Yield Strength

This is the amount of stress at which the steel begins to deform plastically. It is also specified in megapascals (MPa) or pounds per square inch (psi).

11) PPGI Steel Application

PPGI coils can be designed for specific applications, such as roofing, siding, automotive parts, appliances, etc.

 

Remember, it's crucial to consult the manufacturer's specifications for precise details as they may vary between different products and brands.