3000 KVA-3.3 KV VPI Dry Type Transformer Was Finished
Jan 24, 2024
Leave a message
Transformer description:
This 3000 kVA 3.3kV VPI dry type transformer for motor reduce voltage start.The primary side voltage is 3.3 kV and the secondary side with 3 groups output voltage 2.475,2.145 and 1.815 kV.The vector group is Ya0III,coils warped with H class Nomex paper which can suffer 220 degree temperature, equipped with PT100 in each phase.
Finished 3000 kVA VPI dry type transformer:

What is the VPI dry type transformer:
VPI transformer is a new structural concept, which is suitable for installation requiring special attention to the environment and using the least flammable materials.
Windings below 1.1kv are made of continuous layer foil or strip; For higher voltages, the winding consists of disks connected in series or in parallel according to the voltage or power of the winding.
Insulation can be class F or h, impregnated with class H polyester resin
All air insulated products contain a small amount of flammable materials and less resin solution, which is not compared with oil solution.
Transformers immersed in air are suitable not only for power distribution, but also for any type of special applications (such as resin transformers). There are no special restrictions on the insulation grade, but it is generally not used for grades higher than 36 kV.
Transformer details:
There are 3taps in secondary 55%,65%,75%,which can get 3 different output voltage.You can see below picture,there are 3 taps in sencondary side.


