100kVA three-phase Oil Type Transformer
Oct 29, 2025
Leave a message
The three-phase oil-immersed transformer is manufactured with premium silicon steel and oxygen-free copper windings. It features low loss, low noise, and high efficiency. With oil used for insulation and cooling, it ensures stable performance under various operating conditions. It is widely applied in power transmission and distribution systems, industrial facilities, and infrastructure projects.
GNEE specializes in the R&D and manufacturing of power equipment, with years of experience in transformer production. We are committed to providing high-efficiency, reliable, and energy-saving power solutions. All products comply with ISO quality management standards and are certified nationally and internationally, serving both domestic and overseas markets.


100kVA three-phase Oil Type Transformer Specification
Technical data of S13-M 10kV three-phase full seal non excitation voltage regulating distribution transformer
| Rated Power(kva) | High Voltage(kv) | High Voltage Tapping range | Low Voltage(kv) | Connection symbol | No-load loss(kw) | load loss(W) 75° | Short clroult Impedance (%) | No-load current(%) |
| 30 | 6 10 10.5 11 | ±5% or ±2×5% | 0.4 | Dyn11 or Yyn0 | 80 | 630/600 | 4 | 2.1 |
| 50 | 100 | 910/870 | 4 | 1.9 | ||||
| 80 | 130 | 1310/1250 | 4 | 1.8 | ||||
| 100 | 150 | 1580/1500 | 4 | 1.6 | ||||
| 125 | 170 | 1890/1800 | 4 | 1.5 | ||||
| 160 | 200 | 2310/2200 | 4 | 1.4 | ||||
| 200 | 240 | 2730/2600 | 4 | 1.3 | ||||
| 250 | 390 | 3200/3050 | 4 | 1.2 | ||||
| 315 | 340 | 3830/3650 | 4 | 1.1 | ||||
| 400 | 410 | 4520/4300 | 4 | 1 | ||||
| 500 | 480 | 5410/5150 | 4 | 1 | ||||
| 630 | 570 | 6200 | 4.5 | 0.9 | ||||
| 800 | 700 | 7500 | 4.5 | 0.8 | ||||
| 1000 | 830 | 10300 | 4.5 | 0.7 | ||||
| 1250 | 970 | 12000 | 4.5 | 0.6 | ||||
| 1600 | 1170 | 14500 | 4.5 | 0.6 | ||||
| 2000 | 1360 | 18000 | 4.5 | 0.5 | ||||
| 2500 | 1610 | 21000 | 4.5 | 0.4 |
100kVA Oil filled Transformer Service Environment
1. Altitude: Below 1000m;
2. Device type: Outdoor type or indoor type;
3. Ambient temperature: Minus 25ºC to 40ºC
4. Air relative humidity: ≤90% (+25ºC)
5. Installation site: No corrosive gas, no obvious dirt and other areas;
6. For industrial and agricultural power distribution and lighting use.
company profile
GNEE TRANSFORMER has strong production capacity and an efficient marketing team.
Our transformer products include 500kV, 400kV, 330kV, 220kV, and 110kV ultra-high voltage transformers, various dry-type transformers/oil immersed transformers/amorphous alloy transformers of 35kV and below, new energy transformers, and prefabricated substations,
Export series: single-phase transformer, three-phase transformer, cylindrical transformer, isolation transformer, control transformer, voltage regulator and other products, And various specifications of special transformers such as grounding transformers, arc suppression coils, Bitcoin transformers, prefabricated cabins, reactors, electric furnace transformers, rectifier transformers, mining transformers, marine transformers, etc.
GNEE TRANSFORMER has successively passed ISO9001, ISO14001, ISO45001, SA8000 system certification. At the same time, 10kV and 35KV level distribution transformers and box type substations have obtained interna- tional Electrotechnical Commission IEC certification, US UL certification, German TUV certification, EU CE certification, Dutch KEMA certification, and GOST certification. Our product sales cover the global market, including 72 countries and regions such as the United States, Europe, Canada, Mexico, etc.
transformer Workshop equipment display













types of transformer from GNEE
Get Transformer Order specification
GNEE Transformer Order specification
|
When choosing our company's products, please provide the following data to better serve you. |
||
|
Demander |
||
|
Demander: |
Telephonemethods: |
Fax: |
|
Project technical leader: |
Telephonemethods: |
Mailbox: |
|
Transformer type selection |
||
|
□Dry transformer {□SC(B) Epoxy resin □SC(B) Non-encapsulated} □American Box(ZGS) {□Terminal type(-Z-) □Ring network type(-H-)} □European Box change(YBM){□ Dry change □Oil change} |
□ Oil-immersed transformer{□ Fully sealed(-M-) □Oil-bearing pillow} □Amorphous alloy transformer{□Dry amorphous □ Oil amorphous} □ Special transformer{Rectifier, Furnace, Mine, Etc} |
|
Transformer basic data selection
|
Country of use: |
|
|
Phase number: |
□Three-phase(S conventional) □ Monophase □Other( ) |
|
Frequency: |
□50Hz(conventional) □60Hz □ Other( ) |
|
Transformer oil: |
□#25(conventional) □#45(minimum temperature below-25℃) |
|
Rated capacity: |
□( )kVA Conditions of use □Outdoor type □Indoor type |
|
Altitude: |
□Less than 1000m(conventional) □1000-2000m □3000m以上 over |
|
Rated voltage(High voltage) |
□6kV □10kV □20kV □35kV □66kV □110kV □220kV □Other( ) |
|
Rated voltage(Low pressure) |
□0.4kV □0.66kV □10kV □10.5kV □35kV □其他 Other( ) |
|
Connected group |
□Dyn11(conventional) □Yyn0 □YNd11 □li0(Single-phase) □Other( ) |
|
Impedance(%): |
□4% □4.5% □5.5% □6% □6.5% □7.5% □8% □Other( ) |
|
Voltage regulation mode |
□Voltage regulation without excitation(conventional) □On-load voltage regulation(Z) |
|
Voltage regulation range |
□±2*2.5% □±5% □±3*2.5% □Other( ) |
Transformer accessory selection
|
□Fan □Temperature control{□ Common □With 485 computer interface} □Dry case{□ Ordinary steel sheet □Aluminum alloy » Stainless steel} □Protection level of dry case(□IP20(Conventional) □IP( )} □Dry case height requirements{□None □Requirements[ ]} □ Cable out mode of the dry variable shell {□ Up-and-out □ Up-and-down □Down-in/DOWN-out □Down-in/UP-out □Down-in/DOWN-out □Down-in/ side-out [□Left □ Right-out]} |
|
Note: 1. (Dry change requirements s 100kVA transformer does not include fans, such as fans, need to be charged 2. (Oil changes <630kVA transformer does not include temperature control, gas relay, if necessary, need to increase the fee) |
Other special requirements(additional charges apply below)
|
Dry transformer |
□Shell and bottom plate{□Ordinary □Fully sealed} □Travel switch □Magnetic lo □Zero sequence transformer □Copper bar to the low voltage cabinet □Protective mesh □Lighting □100kVA or less Fan □Shock absorber |
|
Oil-immersed transformer |
□No.45 oil for non-low temperature areas □Designated brand on-load voltage regulator □400kVA and below low voltage outlet OABC phase with wiring terminals □630kVA or below requires temperature control □800kVA or below Low voltage outlet phase 0 requires wiring terminals □630kVA and below must be equipped with gas relay |
GNEE TRANSFORMER Industrial Layout
Asia:China, Philippines, Cambodia, Malaysia, Pakistan, Indonesia, Vietnam, Mongolia, Japan, Taiwan Province, Bangladesh, Sri Lanka, Lebanon, Saudi Arabia, Turkey, Armenia, Saudi Arabia, Saudi Arabia, Kazakhstan, Kyrgyzstan, Tajikistan, Uzbekistan
Africa:Egypt, Ethiopia, Angola, Botswana, Burundi, Cape Verde, Congo, Guinea, Ghana, Gabon, Zimbabwe, Cameroon, Kenya, Rwanda, Malawi, Mauritius, Mauritania, Mozambique, South Africa, Nigeria, Somalia, Chad, Central Africa
North America: Aruba, Panama, Dominican Republic, Costa Rica, Honduras, Caribbean region,Canada, United States, Mexico, El Salvador, Guatemala, Jamaica
Europe: Bulgaria, North Macedonia, Finland, Norway, Ukraine, Greece, Hungary, Italy, United Kingdom
South America: Argentina, Paraguay, Ecuador, Colombia, Guyana, Mexico, Uruguay, Chile
Middle East: The Middle East region
Oceania: Australia, Papua New Guinea. Fiji

